Lightweight
One person can easily reposition the drill.
Compact
Allows for drilling in 30-inch patches.
Patented Roller Bearing Feed
Allows for drilling in a 24-inch patch.
The 85B on-grade drill can work in areas as tight as a 30 inch trench, and it can center on slabs as thick as 2 feet. Operators can equip the drill with 5/8- to 2-inch diameter bits and drill to 9-inch depths. The compact unit weighs only 85 pounds, so it’s easy to reposition, load and unload. Install E-Z Drill’s optional wheels for even faster repositioning. And for greater versatility on projects that require vertical drilling, users also can install the optional vertical conversion kit.
Vertical Conversion Kit – Drill vertical holes quickly and accurately.
Wheel Kit – Allow for fast and easy repositioning.
Horizontal Drilling
Vertical Drilling
Industrial Utility
- OPTIONS
-
Vertical Conversion Kit – Drill vertical holes quickly and accurately.
Wheel Kit – Allow for fast and easy repositioning.
- CONFIGURATIONS
-
Horizontal Drilling
Vertical Drilling
- APPLICATIONS
-
Industrial Utility
Horizontal Position
| Lower Length (A) | 30 in (76.2 cm) |
| Width | 12 in (30.5 cm) |
| Height (B) | 22 in (55.9 cm) |
| Weight | 85 lbs (38.6 kg) |
| Drill Distance From Corner | 6 in (15.2 cm) |
| Drill Distance From Ground | 1 in (2.5 cm) |
| Drill Depth (std.) | 9 in (20.3 cm) |
| Drill Bit Diameter | 5/8 in to 2 in (15.9 mm to 50.8 mm) |
| Drill Motor (pneumatic) | CP 14 |
| Drill Motor Weight | 16 lbs (7.62 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 32 cfm (0.9 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 14 fpb (19 J) |
| Hammer Speed | 2900 bpm |
| Speed | 150 rpm |
Vertical Position
| Lower Length (A) | N/A |
| Width | 12 in (30.5 cm) |
| Height (B) | N/A |
| Weight | 85 lbs (38.6 kg) |
| Drill Distance From Corner | N/A |
| Drill Distance From Ground | Up to 6 in (15.2 cm) |
| Drill Depth (std.) | 9 in (20.3 cm) |
| Drill Bit Diameter | 5/8 in to 2 in (15.9 mm to 50.8 mm) |
| Drill Motor (pneumatic) | CP 14 |
| Drill Motor Weight | 16 lbs (7.62 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 32 cfm (0.9 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 14 fpb (19 J) |
| Hammer Speed | 2900 bpm |
| Speed | 150 rpm |
