Lifting Handles
Provides proper leverage for reduced risk of injury.
Patented Roller Bearing Feed
Minimizes friction for faster drilling.
Quick Release Bit Guide
Fast and easy change outs of one-piece bits, bushings and drill steel.
Dual-Purpose Guide Wheels
Switches easily between on-grade repositioning and jobsite transport wheel positions.
Pneumatic Wheels
Allows for fast and easy repositioning.
Achieve greater efficiency with the 110B single-gang, on-grade drill that’s equipped with dual-purpose guide wheels to quickly transition from riding along the face of the slab to moving around the jobsite. The drill operates on the subgrade and fits in a 3-foot patch. A minimum of 50 cfm is required to run the totally pneumatic system, which can drill holes as deep as 12 inches in diameters of 5/8 of an inch to 2 inches. Users can install the optional hole spacing guide, which clearly indicates where to place the 170-pound drill, for even greater accuracy and efficiency when repositioning.
Vertical Conversion Kit – Drill vertical holes quickly and accurately.
Horizontal Drilling
Vertical Drilling
Leg Extensions
Lane Additions
Full-Depth Repair
- OPTIONS
-
Vertical Conversion Kit – Drill vertical holes quickly and accurately.
- CONFIGURATIONS
-
Horizontal Drilling
Vertical Drilling
Leg Extensions
- APPLICATIONS
-
Lane Additions
Full-Depth Repair
Horizontal Position
| Lower Length (A) | 41 3/8 in (105.1 cm) |
| Lower Length w/ Back Wheel Removed | 34 3/4 in (88.3 cm) |
| Width (B) | 12 in (30.5 cm) |
| Height (C) | 29 in (73.7 cm) |
| Weight | 170 lbs (77.2 kg) |
| Drill Distance From Corner | 6 in (15.2 cm) |
| Drill Distance From Ground | 3 in (7.6 cm) |
| Drill Depth (std.) | 12 in (30.5 cm) |
| Drill Bit Diameter | 5/8 in to 2 in (15.9 mm to 50.8 mm) |
| Drill Motor (pneumatic) | CP 22 |
| Drill Motor Weight | 28 lbs (12.7 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 50 cfm (1.4 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 24 fpb (32.6 J) |
| Hammer Speed | 2600 bpm |
| Speed | 210 rpm |
Vertical Position
| Lower Length (A) | N/A |
| Lower Length w/ Back Wheel Removed | N/A |
| Width (B) | 12 in (30.5 cm) |
| Height (C) | N/A |
| Weight | 170 lbs (77.2 kg) |
| Drill Distance From Corner | N/A |
| Drill Distance From Ground | Up to 12 in (7.6 cm) |
| Drill Depth (std.) | 12 in (30.5 cm) |
| Drill Bit Diameter | 5/8 in to 2 in (15.9 mm to 50.8 mm) |
| Drill Motor (pneumatic) | CP 22 |
| Drill Motor Weight | 28 lbs (12.7 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 50 cfm (1.4 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 24 fpb (32.6 J) |
| Hammer Speed | 2600 bpm |
| Speed | 210 rpm |
