![](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-20_UTL.jpg)
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Quick Release Bit Guide
![Bit guide bit guide](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-110B-quickrelease.jpg)
Fast and easy change out of one-piece bits, bushings and drill steel.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Pneumatic Wheels
![Pnematic Wheels pneumatic wheels](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-20UTL-tires.jpg)
Allow for fast and easy repositioning.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Lifting Bale
![Lifting Bale lifting bale](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-20UTL-lift.jpg)
Provides a balanced lifting point for safe loading and unloading.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Patented Roller Bearing Feed
![Roller bearing Feed roller bearing feed](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-110B-rbfeed.jpg)
Minimizes friction for faster drilling.
Use the 20 UTL to increase safety and speed on vertical drilling projects. The frame-mounted drill absorbs vibrations to prevent hand, arm and back injuries commonly associated with handheld drilling. Operators can use the 20 UTL in a variety of applications, such as pinpointing gas leaks, where speed, precision and safety are paramount. Users can drill 5/8- to 2-1/2-inch holes as deep as 18 inches with a minimum of 100 cfm. We also can configure the 20 UTL to drill several feet deep for specific application requirements.
Vertical Drilling
Wheel Modifications
Industrial Utility
Gas Leak Dectection
- CONFIGURATIONS
-
Vertical Drilling
Wheel Modifications
- APPLICATIONS
-
Industrial Utility
Gas Leak Dectection
![E-Z Drill 20 UTL concrete dowel pin drill application gas leak detection drill](https://www.ezdrill.com/wp-content/uploads/2014/02/20UTLap.jpg)
![E-Z Drill 20 UTL concrete dowel pin drill specifications gas leak pinpointing drill](https://www.ezdrill.com/wp-content/uploads/2014/02/20UTLspecs.jpg)
Vertical Position
Lower Length (C) | 32 1/2 in (82.6 cm) |
Wheel Base (B) | 29 in (73.7 cm) |
Height (A) | 50 in (127.0 cm) |
Weight | 207 lbs (94 kg) |
Drill Distance From Corner | N/A |
Drill Distance From Ground | N/A |
Drill Depth (std.) | 18 in (45.7 cm) |
Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
Drill Motor (pneumatic) | CP 32A |
Drill Motor Weight | 54 lbs (24.5 kg) |
Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
Air Consumption (minimum) | 100 cfm (2.8 m 3 /min) |
Operating Pressure | 90 psi (6.2 bar) |
Impact (ft. lbs./blow) | 36 fpb (49 J) |
Hammer Speed | 2200 bpm |
Speed | 288 rpm |