![](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-210-5-SRA.jpg)
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper1.png)
Oil Injection
Lubricates each drill motor to increase wear life.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper1.png)
Foam-Filled Tires
![Foam Filled Tires foam filled tires](http://www.ezdrill.com/wp-content/uploads/2014/02/e-z-drill-foam-filled-tires.jpg)
Eliminates flat tires for accurate drilling.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper1.png)
Auto-Alignment
![Auto Alignment auto alignment](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-210B-2-SRA-auto-align.jpg)
Allows for faster repositioning after each hole set for increased productivity.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper1.png)
Patented Roller Bearing Feed
![Auto Drill Shut-off atuo sutoff](http://www.ezdrill.com/wp-content/uploads/2014/02/e-z-drill-auto-drill-shut-off.jpg)
Prevents dry firing to increase drill life and reduce maintenance.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper1.png)
Quick Release Bit Guide
![Bit Guide bit guide](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-110B-quickrelease.jpg)
Quickly and easily change out one-piece bits, bushings and drill steel.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper1.png)
Automatic Drill Shut-Off
![Auto Drill Shut-off atuo sutoff](http://www.ezdrill.com/wp-content/uploads/2014/02/e-z-drill-auto-drill-shut-off.jpg)
Prevents dry firing to increase drill life and reduce maintenance.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper1.png)
Hole Spacing Guide
![Hole Spacing Guide hole spacing guide](http://www.ezdrill.com/wp-content/uploads/2014/02/e-z-drill-hole-guide.jpg)
Quickly and accurately reposition the drill with the hole-spacing guide for increased productivity.
Get the most gang for your buck with the 210B-5 SRA. With this machine, your crews can drill as many as five holes at once to meet even the tightest deadlines. It’s self-propelled for easy maneuverability, and it auto-aligns for accurate and fast repositioning. The fully pneumatic 210B-5 SRA requires 500 cfm and can tow the air compressor, which eliminates the need for a separate vehicle and saves space on the jobsite. Whether your projects are large or small, the 210B-5 SRA can handle it all.
Horizontal Drilling
Vertical Drilling
Airports
Lane Additions
Full-Depth Repair
- OPTIONS
- CONFIGURATIONS
-
Horizontal Drilling
Vertical Drilling
- APPLICATIONS
-
Airports
Lane Additions
Full-Depth Repair
![E-Z Drill 210-5 SRA slab rider concrete dowel pin drill E-Z Drill 210-5 SRA slab rider concrete dowel pin drill](https://www.ezdrill.com/wp-content/uploads/2014/02/210-5sra.png)
![E-Z Drill 210-5 SRA slab rider concrete dowel pin drill specs E-Z Drill 210-5 SRA slab rider concrete dowel pin drill specifications](https://www.ezdrill.com/wp-content/uploads/2014/02/2105SRAspecs.png)
Horizontal Position
Lower Length (A) | 47 in (119.4 cm) |
Overall Length (A) + (C) | 117 in (297.2 cm) |
Cart Length (C) | 70 in (177.8 cm) |
Wheel Base (D) | 58 in (147.3 cm) |
Width | 60 in (152.4 cm) |
Height | 44 in (111.8 cm) |
Weight | 2400 lbs (1089.6 kg) |
Drill Distance From Corner | 6 in (15.2 cm) |
Drill Distance From Ground | 3 in (7.6 cm) |
Drill Depth (std.) | 18 in (45.7 cm) |
Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
Distance From Wheel to Center of Bit | N/A |
Drill Motor (pneumatic) | CP 32A |
Drill Motor Weight | 54 lbs (24.5 kg) |
Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
Air Consumption (minimum) | 500 cfm (14 m 3 /min) |
Operating Pressure | 90 psi (6.2 bar) |
Impact (ft. lbs./blow) | 36 fpb (49 J) |
Hammer Speed | 2200 bpm |
Speed | 288 rpm |
Vertical Position
Lower Length (A) | 47 in (119.4 cm) |
Overall Length (A) + (B) | 91 in (231.1 cm) |
Frame Length (B) | 44 in (111.8 cm) |
Width | 47 in (119.4 cm) |
Height | 35 in (88.9 cm) |
Weight | 1500 lbs (681 kg) |
Drill Distance From Corner | 6 in (15.2 cm) |
Drill Distance From Ground | 3 in (7.6 cm) |
Drill Depth (std.) | 18 in (45.7 cm) |
Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
Drill Motor (pneumatic) | CP 32A |
Drill Motor Weight | 54 lbs (24.5 kg) |
Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
Air Consumption (minimum) | 300 cfm (8.4 m 3 /min) |
Operating Pressure | 90 psi (6.2 bar) |
Impact (ft. lbs./blow) | 36 fpb (49 J) |
Hammer Speed | 2200 bpm |
Speed | 288 rpm |