Bushing Sizes
E-Z Drill bushing sizes correspond with hole diameters. For example, a 7/8-inch bushing (1110 MCP) fits a bit that can drill a 7/8-inch hole. It will not, however, work with a 7/8-inch steel or 7/8-inch hex shank since these pieces reference the shank size, not the hole size. Consult the “Drill Bits and Drill Steel” chart below for size requirements specific to each drill.
Drill Bits and Drill Steel
| Part Number | Bit Diameter | Drill Depth in the E-Z Drill | Under Collar Length | Chuck Size | Correct Bushing 210 Models | Correct Bushing 200 Models |
|---|---|---|---|---|---|---|
| B-102 | 5/8″ | 12″ | 18″ | 7/8″ x 3 1/4″ | 1108 MCP | 1101 MCP |
| B-103 | 5/8″ | 18″ | 24″ | 7/8″ x 3 1/4″ | 1108 MCP | 1101 MCP |
| B-202 | 3/4″ | 12″ | 18″ | 7/8″ x 3 1/4″ | 1109 MCP | 1102 MCP |
| B-203 | 3/4″ | 18″ | 24″ | 7/8″ x 3 1/4″ | 1109 MCP | 1102 MCP |
| B-302 | 7/8″ | 12″ | 18″ | 7/8″ x 3 1/4″ | 1110 MCP | 1103 MCP |
| B-303 | 7/8″ | 18″ | 24″ | 7/8″ x 3 1/4″ | 1110 MCP | 1103 MCP |
| B-402 | 1″ | 12″ | 18″ | 7/8″ x 3 1/4″ | 1111 MCP | 1104 MCP |
| B-403 | 1″ | 18″ | 24″ | 7/8″ x 3 1/4″ | 1111 MCP | 1104 MCP |
| B-502 | 1 1/8″ | 12″ | 18″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-503 | 1 1/8″ | 18″ | 24″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-602 | 1 1/4″ | 12″ | 18″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-603 | 1 1/4″ | 18″ | 24″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-701 | 18″ Drill Steel | 12″ | 18″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-702 | 24″ Drill Steel | 18″ | 24″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-801 | 1 3/8″ | 12″ | 18″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-802 | 1 3/8″ | 18″ | 24″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-803 | 1 1/2″ | 12″ | 18″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
| B-804 | 1 1/2″ | 18″ | 24″ | 7/8″ x 3 1/4″ | 1112 MCP | 1105 MCP |
