110B On-Grade
Achieve greater efficiency with the 110B single-gang, on-grade drill that’s equipped with dual-purpose guide wheels to quickly transition from riding along the face of the slab to moving around the jobsite. The drill operates on the subgrade and fits in a 3-foot patch. A minimum of 50 cfm is required to run the totally pneumatic system, which can drill holes as deep as 12 inches in diameters of 5/8 of an inch to 2 inches. Users can install the optional hole spacing guide, which clearly indicates where to place the 170-pound drill, for even greater accuracy and efficiency when repositioning.
| HORIZONTAL POSITION | |
|---|---|
| Drill Depth | 12” (30.5 cm) |
| Drill Depth w/ Dust Collection Kit | 9 3/4” (24.8 cm) |
| Drill Bit Diameter | 5/8” to 2” (15.9 mm to 50.8 mm) |
| Air Consumption (minimum) | 50 cfm (1.4 m³/min) |
| Air Consumption w/ Dust Collection Kit (minimum) | 90 cfm (2.6 m³/min) |
| Minimum Hose Size (ID) | 3/4" (19.1 mm) |
| Operating Pressure at Drill Motor | 90 psi (6.2 bar) |
| Drill Distance from Corner | 6” (15.2 cm) |
| Drill Distance from Ground | 3” (7.6 cm) |
| Minimum Patch Size w/ Back Wheel Removed @ center of hole 3”-12” Below Top of Slab | 36” (91.4 cm) |
| Minimum Patch Size w/ Dust Collection Kit and Back Wheel Removed @ center of hole 3”-12” Below Top of Slab | 39” (99.1 cm) |
| Weight | 215 lbs. (97.5 kg) |
| Weight w/ Dust Collection Kit | 306 lbs. (138.8 kg) |
| Drill Motor (pneumatic) | CP 22 |
| Drill Motor Weight | 29 lbs. (13.2 kg) |
| Chuck Size | 7/8” x 3 1/4" (22.2 mm x 82.6 mm) |
| Impact (ft. lbs./blow) | 24 fpb (32.5 J) |
| Blows/minute | 2600 bpm |
| Rotations/minute | 210 rpm |
