210-4 EQ MT
Attach the 210-4 EQ MT to nearly any backhoe or excavator for drilling four holes at once. You can drill to depths of 18 inches and adjust the height of the gangs for accurate drilling in areas with extreme asphalt overlay. The unit’s “floating” bucket curl pin helps level the drill, which saves you time by eliminating the need for manual leveling or positioning.
210-4 EQ MT RESOURCES
| HORIZONTAL POSITION | |
|---|---|
| Drill Depth | 18” (45.7 cm) |
| Drill Depth w/ Dust Collection Kit | 15 3/4” (40.0 cm) |
| Drill Bit Diameter | 5/8” to 2 1/2” (15.9 mm to 63.5 mm) |
| Air Consumption (minimum) | 400 cfm (11.3 m³/min) |
| Air Consumption w/ Dust Collection Kit (minimum) | 400 cfm (11.3 m³/min) |
| Minimum Hose Size (ID) | 2" (50.8 mm) |
| Operating Pressure at Drill Motor | 90 psi (6.2 bar) |
| Drill Distance from Corner | 6” (15.2 cm) |
| Drill Distance from Ground | 3” (7.6 cm) |
| Minimum Patch Size @ center of hole 3”-15” Below Top of Slab | 48” (121.9 cm) |
| Minimum Patch Size w/ Dust Collection Kit @ center of hole 3”-15” Below Top of Slab | 51” (129.5 cm) |
| Weight | 2050 lbs. (929.9 kg) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs. (24.5 kg) |
| Chuck Size | 7/8” x 3 1/4" (22.2 mm x 82.6 mm) |
| Impact (ft. lbs./blow) | 36 fpb (48.8 J) |
| Blows/minute | 2200 bpm |
| Rotations/minute | 288 rpm |
