210B-3 SRA Slab Rider
Drill up to three holes at once with the 210B-3 SRA slab rider. It features individually adjustable drill systems for drilling holes every 12 to 36 inches on center in both the horizontal and vertical configurations, and you can operate within a 4-foot patch and drill into slabs as thick as 24 inches. The 210B-3 SRA requires 300 cfm and is self-propelled for hassle-free maneuverability. To easily tow the air compressor, equip it with the optional tow bar package.
| HORIZONTAL POSITION | |
|---|---|
| Drill Depth | 18” (45.7 cm) |
| Drill Depth w/ Dust Collection Kit | 15 3/4” (40.0 cm) |
| Drill Bit Diameter | 5/8” to 2 1/2” (15.9 mm to 63.5 mm) |
| Air Consumption (minimum) | 300 cfm (8.5 m³/min) |
| Air Consumption w/ Dust Collection Kit (minimum) | 400 cfm (11.3 m³/min) |
| Minimum Hose Size (ID) | 2" (50.8 mm) |
| Operating Pressure at Drill Motor | 90 psi (6.2 bar) |
| Drill Distance from Corner | 6” (15.2 cm) |
| Drill Distance from Ground | 3” (7.6 cm) |
| Minimum Patch Size @ center of hole 3”-12” Below Top of Slab | 48” (121.9 cm) |
| Minimum Patch Size w/ Dust Collection Kit @ center of hole 3”-12” Below Top of Slab | 51” (129.5 cm) |
| Weight | 2324 lbs. (1054.1 kg) |
| Weight w/ Dust Collection Kit | 2624 lbs. (1190.2 kg) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs. (24.5 kg) |
| Chuck Size | 7/8” x 3 1/4" (22.2 mm x 82.6 mm) |
| Impact (ft. lbs./blow) | 36 fpb (48.8 J) |
| Blows/minute | 2200 bpm |
| Rotations/minute | 288 rpm |
| VERTICAL POSITION | |
|---|---|
| Drill Depth | 18” (45.7 cm) |
| Drill Depth w/ Dust Collection Kit | 15 3/4” (40.0 cm) |
| Drill Bit Diameter | 5/8” to 2 1/2” (15.9 mm to 63.5 mm) |
| Air Consumption (minimum) | 300 cfm (8.5 m³/min) |
| Air Consumption w/ Dust Collection Kit (minimum) | 400 cfm (11.3 m³/min) |
| Minimum Hose Size (ID) | 2" (50.8 mm) |
| Operating Pressure at Drill Motor | 90 psi (6.2 bar) |
| Drill Distance from Corner | N/A |
| Drill Distance from Ground | Up to 12” (30.5 cm) |
| Minimum Patch Size @ center of hole 3”-12” Below Top of Slab | N/A |
| Minimum Patch Size w/ Dust Collection Kit @ center of hole 3”-12” Below Top of Slab | N/A |
| Weight | 2324 lbs. (1054.1 kg) |
| Weight w/ Dust Collection Kit | 2624 lbs. (1190.2 kg) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs. (24.5 kg) |
| Chuck Size | 7/8” x 3 1/4" (22.2 mm x 82.6 mm) |
| Impact (ft. lbs./blow) | 36 fpb (48.8 J) |
| Blows/minute | 2200 bpm |
| Rotations/minute | 288 rpm |
