210B-5 SRA Slab Rider
Get the most gang for your buck with the 210B-5 SRA. With this machine, your crews can drill as many as five holes at once in both the horizontal and vertical configurations to meet even the tightest deadlines. It’s self-propelled for easy maneuverability, and it auto-aligns for accurate and fast repositioning. The fully pneumatic 210B-5 SRA requires 500 cfm and can tow the air compressor, which eliminates the need for a separate vehicle and saves space on the jobsite. Whether your projects are large or small, the 210B-5 SRA can handle it all.
| HORIZONTAL POSITION | |
|---|---|
| Drill Depth | 18” (45.7 cm) |
| Drill Depth w/ Dust Collection Kit | 15 3/4” (40.0 cm) |
| Drill Bit Diameter | 5/8” to 2 1/2” (15.9 mm to 63.5 mm) |
| Air Consumption (minimum) | 500 cfm (14.2 m³/min) |
| Air Consumption w/ Dust Collection Kit (minimum) | 660 cfm (18.7 m³/min) |
| Minimum Hose Size (ID) | 2" (50.8 mm) |
| Operating Pressure at Drill Motor | 90 psi (6.2 bar) |
| Drill Distance from Corner | 6” (15.2 cm) |
| Drill Distance from Ground | 3” (7.6 cm) |
| Minimum Patch Size @ center of hole 3”-12” Below Top of Slab | 48” (121.9 cm) |
| Minimum Patch Size w/ Dust Collection Kit @ center of hole 3”-12” Below Top of Slab | 51” (129.5 cm) |
| Weight | 2812 lbs. (1275.5 kg) |
| Weight w/ Dust Collection Kit | 3212 lbs. (1456.9 kg) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs. (24.5 kg) |
| Chuck Size | 7/8” x 3 1/4" (22.2 mm x 82.6 mm) |
| Impact (ft. lbs./blow) | 36 fpb (48.8 J) |
| Blows/minute | 2200 bpm |
| Rotations/minute | 288 rpm |
| VERTICAL POSITION | |
|---|---|
| Drill Depth | 18” (45.7 cm) |
| Drill Depth w/ Dust Collection Kit | 15 3/4” (40.0 cm) |
| Drill Bit Diameter | 5/8” to 2 1/2” (15.9 mm to 63.5 mm) |
| Air Consumption (minimum) | 500 cfm (14.2 m³/min) |
| Air Consumption w/ Dust Collection Kit (minimum) | 660 cfm (18.7 m³/min) |
| Minimum Hose Size (ID) | 2" (50.8 mm) |
| Operating Pressure at Drill Motor | 90 psi (6.2 bar) |
| Drill Distance from Corner | N/A |
| Drill Distance from Ground | Up to 12” (30.5 cm) |
| Minimum Patch Size @ center of hole 3”-12” Below Top of Slab | N/A |
| Minimum Patch Size w/ Dust Collection Kit @ center of hole 3”-12” Below Top of Slab | N/A |
| Weight | 2812 lbs. (1275.5 kg) |
| Weight w/ Dust Collection Kit | 3212 lbs. (1456.9 kg) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs. (24.5 kg) |
| Chuck Size | 7/8” x 3 1/4" (22.2 mm x 82.6 mm) |
| Impact (ft. lbs./blow) | 36 fpb (48.8 J) |
| Blows/minute | 2200 bpm |
| Rotations/minute | 288 rpm |
