210B On-Grade
Drill 5/8- to 2-1/2-inch holes 18 inches deep in a 4-foot patch with the only on-grade drill on the market with these capabilities – the 210B. It requires just 100 cfm to operate, and the dual-purpose guide wheels transition simply from on-grade positioning to easy transportation around the jobsite. With its adjustable drill height you can drill into the center of slabs that are 6 to 24 inches thick.
| HORIZONTAL POSITION | |
|---|---|
| Drill Depth | 18” (45.7 cm) |
| Drill Depth w/ Dust Collection Kit | 15 3/4” (40.0 cm) |
| Drill Bit Diameter | 5/8” to 2 1/2” (15.9 mm to 63.5 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m³/min) |
| Air Consumption w/ Dust Collection Kit (minimum) | 140 cfm (4.0 m³/min) |
| Minimum Hose Size (ID) | 3/4" (19.1 mm) |
| Operating Pressure at Drill Motor | 90 psi (6.2 bar) |
| Drill Distance from Corner | 6” (15.2 cm) |
| Drill Distance from Ground | 3” (7.6 cm) |
| Minimum Patch Size w/ Back Wheel Removed @ center of hole 3”-12” Below Top of Slab | 48” (121.9 cm) |
| Minimum Patch Size w/ Dust Collection Kit and Back Wheel Removed @ center of hole 3”-12” Below Top of Slab | 51” (129.5 cm) |
| Weight | 256 lbs. (116.1 kg) |
| Weight w/ Dust Collection Kit | 347 lbs. (157.4 kg) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs. (24.5 kg) |
| Chuck Size | 7/8” x 3 1/4" (22.2 mm x 82.6 mm) |
| Impact (ft. lbs./blow) | 36 fpb (48.8 J) |
| Blows/minute | 2200 bpm |
| Rotations/minute | 288 rpm |
| VERTICAL POSITION | |
|---|---|
| Drill Depth | 18” (45.7 cm) |
| Drill Depth w/ Dust Collection Kit | 15 3/4” (40.0 cm) |
| Drill Bit Diameter | 5/8” to 2 1/2” (15.9 mm to 63.5 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m³/min) |
| Air Consumption w/ Dust Collection Kit (minimum) | 140 cfm (4.0 m³/min) |
| Minimum Hose Size (ID) | 3/4" (19.1 mm) |
| Operating Pressure at Drill Motor | 90 psi (6.2 bar) |
| Drill Distance from Corner | N/A |
| Drill Distance from Ground | Up to 12” (30.5 cm) |
| Minimum Patch Size w/ Back Wheel Removed @ center of hole 3”-12” Below Top of Slab | N/A |
| Minimum Patch Size w/ Dust Collection Kit and Back Wheel Removed @ center of hole 3”-12” Below Top of Slab | N/A |
| Weight | 256 lbs. (116.1 kg) |
| Weight w/ Dust Collection Kit | 347 lbs. (157.4 kg) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs. (24.5 kg) |
| Chuck Size | 7/8” x 3 1/4" (22.2 mm x 82.6 mm) |
| Impact (ft. lbs./blow) | 36 fpb (48.8 J) |
| Blows/minute | 2200 bpm |
| Rotations/minute | 288 rpm |
