![](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-240B.jpg)
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Detachable Quick Release Bit Guide
![Quick Rlease Bit Guide bit guide](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-110B-quickrelease.jpg)
Fast and easy change outs of one-piece bits, bushings and drill steel.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Dual-Purpose Guide Wheels
![Guide Wheels wheel guide](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-110B-dualguide.jpg)
Switch easily between on-grade repositioning and jobsite transport wheel options.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Patented Roller Bearing Feed
![Roller Bearing Feed roller bearing](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-110B-rbfeed.jpg)
Minimizes friction for faster drilling.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Lifting Handles
![Lifting Handles lifting handles](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-210B-lifthandles.jpg)
Provide proper leverage and reduces the risk of injury.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Pneumatic Wheels
![Pneumatic Wheels pneumatic wheels](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-110B-mobile.jpg)
Allow for fast and easy repositioning.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Water Connection
![Water Connection water connection](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-240B-waterconnection.jpg)
Convenient water connection for core drilling.
![](http://www.ezdrill.com/wp-content/uploads/2014/02/mapper.png)
Adjustable Height
![Adjustable Hieght adjustable hieght](http://www.ezdrill.com/wp-content/uploads/2014/02/E-Z-Drill-240B-height.jpg)
Versatility to drill on center in 6- to 24-inch thick slabs.
With the 240B combo drill, you can switch between rock drilling and core drilling with a bit guide and motor change for greater versatility on jobsites. Use it to drill within a 4-foot patch, and core and drill 5/8- to 2-1/2-inch-diameter holes to 18 inches deep. The fully pneumatic drill can operate at three speeds – 400, 900 and 1,600 rpm – and requires a minimum of 77 cfm. The rock drill configuration requires 100 cfm. Both rock and core drill motors and bit guides are included with the 240B drill.
Vertical Conversion Kit – Drill vertical holes quickly and accurately.
Dust Collection System – Minimize dust with this totally pneumatic system.
Horizontal Drilling
Vertical Drilling
24-Inch Depth with Leg Extensions
30-Inch Depth
Airports
Lane Additions
Full-Depth Repair
Core Drilling
- OPTIONS
-
Vertical Conversion Kit – Drill vertical holes quickly and accurately.
Dust Collection System – Minimize dust with this totally pneumatic system.
- CONFIGURATIONS
-
Horizontal Drilling
Vertical Drilling
24-Inch Depth with Leg Extensions
30-Inch Depth
- APPLICATIONS
-
Airports
Lane Additions
Full-Depth Repair
Core Drilling
![E-Z Drill 240B application portable concrete core drill](https://www.ezdrill.com/wp-content/uploads/2014/02/240Bap.jpg)
![E-Z Drill 240B Specs E-Z Drill 240B Concrete Drill Specs](https://www.ezdrill.com/wp-content/uploads/2014/02/240BSpecs.jpg)
Horizontal Position
Lower Length (A) | 51 3/8 in (130.5 cm) |
Lower Length w/ Back Wheel Removed | 46 in (116.8 cm) |
Width (B) | 12 in (30.5 cm) |
Height (C) | 30 in (76.2 cm) |
Weight | 285 lbs (104.4 kg) |
Drill Distance From Corner | 6 in (15.2 cm) |
Drill Distance From Ground | 3 in (7.6 cm) |
Drill Depth (std.) | 18 in (45.7 cm) |
Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
Rock Drill Motor (pneumatic) | CP 32A |
Drill Motor Weight | 54 lbs (24.5 kg) |
Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
Air Consumption (minimum) | 100 cfm (2.8 m 3 /min) |
Operating Pressure | 90 psi (6.2 bar) |
Impact (ft. lbs./blow) | 36 fpb (49 J) |
Hammer Speed | 2200 bpm |
Speed | 288 rpm |
Core Drill Motor (pneumatic) | CS Unitec |
Drill Motor Weight | 18 lbs (8 kg) |
Bit Connection | 1 1/4 in x 7 in UNC |
Air Consumption (minimum) | 77 cfm (2.2 m 3 /min) |
Air Motor | 2.1 HP (1.6 kW) |
3 – Speed | 400 rpm, 900 rpm, 1600 rpm |
Vertical Position
Lower Length (A) | 24 1/2 in (62.2 cm) |
Lower Length w/ Back Wheel Removed | N/A |
Width (B) | 30 in (76.2 cm) |
Height (C) | 56 in (142.2 cm) |
Weight | 285 lbs (104.4 kg) |
Drill Distance From Corner | 3 in (7.6 cm) |
Drill Distance From Ground | up to 12 in (30.5 cm) |
Drill Depth (std.) | 18 in (45.7 cm) |
Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
Rock Drill motor (pneumatic) | CP 32A |
Drill Motor Weight | 54 lbs (24.5 kg) |
Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
Air Consumption (minimum) | 100 cfm (2.8 m 3 /min) |
Operating Pressure | 90 psi (6.2 bar) |
Impact (ft. lbs./blow) | 36 fpb (49 J) |
Hammer Speed | 2200 bpm |
Speed | 288 rpm |
Core Drill Motor (pneumatic) | CS Unitec |
Drill Motor Weight | 18 lbs (8 kg) |
Bit Connection | 1 1/4 in x 7 in UNC |
Air Consumption (minimum) | 77 cfm (2.2 m 3 /min) |
Air Motor | 2.1 HP (1.6 kW) |
3 – speed (rpm) | 400 rpm, 900 rpm, 1600 rpm |