Oil Injection
Lubricates each drill motor to increase wear life.
Auto-Alignment
Allows for faster repositioning after each hole set for increased productivity.
Quick Release Bit Guide
Quickly and easily change out one-piece bits, bushings and drill steel.
Patented Roller Bearing Feed
Minimizes friction for faster drilling.
Achieve greater efficiency when drilling on slab with the 210B-2 SRA. It’s equipped with two-gang drill system that operates simultaneously and are adjustable to drill every 12 to 36 inches on center. It also can be customized to meet wider spacing requirements. The 210B-2 SRA requires 200 cfm and fits within a 4-foot patch. It also can be configured for on-grade drilling. With its patented tri-steering system, the drill repositions quickly and moves easily.
Hole Spacing Guide – Reposition the drill with the hole spacing guide to increase productivity.
Dust Collection System – Minimize dust with this totally pneumatic system.
On-Grade Conversion Kit – Drill from the grade without buying a second drill.
Horizontal Drilling
Vertical Drilling
Airports
Lane Additions
Full-Depth Repair
- OPTIONS
-
Hole Spacing Guide – Reposition the drill with the hole spacing guide to increase productivity.
Dust Collection System – Minimize dust with this totally pneumatic system.
On-Grade Conversion Kit – Drill from the grade without buying a second drill.
- CONFIGURATIONS
-
Horizontal Drilling
Vertical Drilling
- APPLICATIONS
-
Airports
Lane Additions
Full-Depth Repair
Horizontal Position
| Lower Length (A) | 46 in (116.8 cm) |
| Lower Length (A) + (C) | 100 in (254.0 cm) |
| Cart Length (C) | 54 in (137.2 cm) |
| Wheel Base (D) | 48 in (121.9 cm) |
| Width | 54 in (137.2 cm) |
| Height (E) | 39 in (99.1 cm) |
| Weight | 1,150 lbs (522.1 kg) |
| Drill Distance From Corner | 6 in (15.2 cm) |
| Drill Distance From Ground | 3 in (7.6 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Distance From Wheel to Center of Bit (F) | N/A |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 200 cfm (5.6 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 36 fpb (49 J) |
Vertical Position
| Lower Length (A) | N/A |
| Lower Length (A) + (C) | 73 in (185.4 cm) |
| Cart Length (C) | 54 in (137.2 cm) |
| Wheel Base (D) | 48 in (121.9 cm) |
| Width | 54 in (137.2 cm) |
| Height (E) | Varies |
| Weight | 1,150 lbs (522.1 kg) |
| Drill Distance From Corner | N/A |
| Drill Distance From Ground | Up to 12 in (30.5 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Distance From Wheel to Center of Bit (F) | 21 1/2 in (54.6 cm) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 200 cfm (5.6 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 36 fpb (49 J) |
